Mower Blades Should Match the Grass and Terrain
Differences Between Actual Metal Blades and Nylon Heads, and Compatibility Check Methods
Nylon lines can help reduce impacts around stones or obstacles, but they do not eliminate the risk of small stones and line fragments flying. Metal blades can quickly cut tough grass, but the risk of bouncing and breaking increases when they hit stones or wires. Rather than relying on the seller's claim of compatibility, it is structured to prioritize the allowable attachments, rotation direction, and maximum RPM specified in the main body’s manual.
Makita 2-Blade Cutter 198345-9
Makita 2-Bladed Cutter 198345-9
Makita 4-Blade Cutter 195150-5
Makita 4-Bladed Cutter 195150-5
Makita Nylon Cutting Head 191D89-4
STIHL AutoCut C 26-2
STIHL PolyCut 28-2
Husqvarna Grass 255-4
Husqvarna Multi 275-4
Husqvarna T35 Tap-n-Go
If there are many stones, tombstones, and wire fences in the working area, avoiding obstacles and maintaining a low risk of flying debris is more important than cutting speed. Woody stems or thick shrubs may exceed the range of a typical grass-cutting blade, so do not push too hard. Regardless of which head you use, the principle of not placing other people in the working radius, and equipping protective goggles and face shields along with protective covers remains unchanged.
As part of the Coupang Partners program, this post may earn a commission from qualifying purchases.
Comments 0
Log in to leave a comment.
Be the first to comment.
How about these lists?
You might also like
Not ready to stop here?
Wondering what to read next is the biggest waste of time.
Let the dice decide — you won't know what pops up until you roll.
If you don't press it… won't you wonder forever? 👀